Seitenhistorie

Seiteneigenschaften

Description:

This article describes how to read out the bootlog on switches of the GS-23xx series.

Requirement:

Procedure:

1) Connect to the switch by SSH and log in with admin rights.

Note:

Info
Instead of using SSH, you can also connect via a serial console cable as supplied with the switch. The required parameters can be found in this Knowledge Base article:

Image Removed

Image Added

2) Enter the command debug to enter the debug environment.

Image Removed

Image Added

3) Enter the command show-bootlog to output the bootlog.

Image Removed

Image Added

Seitenhierarchie