Sie zeigen eine alte Version dieser Seite an. Zeigen Sie die aktuelle Version an.

Unterschiede anzeigen Seitenhistorie anzeigen

Version 2 Nächste Version anzeigen »


Description: This article describes how to read out the bootlog on switches of the GS-23xx series.


Requirement: Procedure:

1) Connect to the switch by SSH and log in with admin rights.

    Note:
    Instead of using SSH, you can also connect via a serial console cable as supplied with the switch.

    The required parameters can be found in this article: Dokumentlinksymbol




2) Enter the command debug to enter the debug environment.



3) Enter the command show-bootlog to output the bootlog.



  • Keine Stichwörter