Seitenhistorie

This article describes how an ADSL or VDSL connection implemented via an upstream DSL modem and using a VLAN ID can be set up on a Unified Firewall (PPPoE) and how this can be assigned to an Internet object on the desktop. 



Requirements:

• LANCOM R&S® Unified Firewall with firmware as of version 10.2
• Internet access via upstream DSL modem
• Web browser for configuring the Unified Firewall. 
  
  The following browsers are supported:
  
  • Google Chrome
  • Chromium
  • Mozilla Firefox

Procedure:

1.1) Open the configuration interface of the Unified Firewall in your browser, change to the menu Network → Connections → Network Connections and click on the chevron icon to enter the advanced view.

1.2) Delete the entry for the interface eth0.

By default the interfaceeth0 is set toDHCP.Image Removed

1.3) Navigate to the menu menu Network -> → Interfaces -> → VLAN Interfaces and click on the “+” icon to create a new entry.Image Removed

1.4) Enter the following parameters:

1.5) Navigate to the menu menu Network -> → Interfaces -> → PPP Interfaces and click on the “+” icon to create a new PPP interface.Image Removed

1.6) For For Master Interface, select the VLAN Interface created in step 1.4.Image Removed

1.7) Change to the menu menu Network -> → Connections -> → PPP Connections and click on the “+” icon under PPP Connections to create a new entry.Image Removed

1.8) Enter the following parameters:

• Name: Enter a descriptive name.
• Interface: Select the PPP interface created in step 1.6.
• Type: Check that the value is set to PPPoE.
• Username: Enter Username for DSL dial-in assigned to you by your provider.
• Password: Enter the password for DSL dial-in assigned to you by your provider.

2) Create a desktop object for the Internet connection:

2.1) Click the button to to Create an Internet object.Image Removed

2.2) Enter the following parameters:

• Object Name: Enter a descriptive name.
• Connections: From the drop-down menu, select the PPP Connection created in step 1.8 and click on the “+” icon to add the object.

Image Removed

3) Saving and activating the configuration steps:

3.1) Click on the the Activate button to accept the changes and enable filtering.Image Removed