Versionen im Vergleich

Alte Version 2

changes.mady.by.user LANCOM Redaktion

Gespeichert am

verglichen mit

Neue Version Aktuell

changes.mady.by.user LANCOM Redaktion

Gespeichert am

Schlüssel

  • Diese Zeile wurde hinzugefügt.
  • Diese Zeile wurde entfernt.
  • Formatierung wurde geändert.
Seiteneigenschaften



Description:

This article describes how to set up an ADSL connection via an upstream DSL modem on a Unified Firewall without specifying a VLAN ID (PPPoE) and assign it to an Internet object on the desktop.



Requirements:
  • LANCOM R&S® Unified Firewall with firmware as of version 10.2
  • Internet access via upstream DSL modem
  • Web browser for configuring the Unified Firewall. 

    The following browsers are supported:
    • Google Chrome
    • Chromium
    • Mozilla Firefox
  • Internet access via upstream DSL modem



    • Procedure:
    1) Setting up the network connection for Internet access:
    1.1) Open the configuration interface of the Unified Firewall in your browser, change to the
    menu
    menu Network
    ->
    → Connections
    ->
    → Network Connections and click on the chevron icon to enter the advanced view.
    Image Removed
    Image Added
    1.2) Delete the entry for the
    interface
    interface eth0.
    Info:
    Info

    By default the

    interface eth0

    interface eth0 is set

    to

    to DHCP.

    Image Removed
    Image Added
    1.3) Navigate to the
    menu
    menu Network
    ->
    → Interfaces
    ->
    → PPP Interfaces and click on the “+” icon to create a new PPP interface.
    Image Removed
    Image Added
    1.4) From the drop-down
    menu
    menu Master Interface, select the interface eth0.
    Image Removed
    Image Added
    1.5) Change to the
    menu
    menu Network
    ->
    → Connections
    ->
    → PPP Connections and click on the “+” icon under PPP Connections to create a new entry.
    Image Removed
    Image Added
    1.6) Enter the following parameters:
    • Name: Enter a descriptive name.
    • Interface: Select the PPP interface created in step 1.4.
    • Type: Check that the value is set to PPPoE.
    • Username: Enter Username for DSL dial-in assigned to you by your provider.
    • Password: Enter the password for DSL dial-in assigned to you by your provider.
    Image Removed
    Image Added


    2) Create a desktop object for the Internet connection:
    2.1) Click the button
    to
    to Create an Internet object.
    Image Removed
    Image Added
    2.2) Enter the following parameters:
    • Object Name: Enter a descriptive name.
    • Connections: From the drop-down menu, select the PPP Connection created in step 1.6 and click on the “+” icon to add the object.
    Image Removed
    Image Added


    3) Saving and activating the configuration steps:
    3.1) Click on
    the
    the Activate button to accept the changes and enable filtering.
    Image Removed
    Image Added