Seitenhistorie

Seiteneigenschaften

Description:

By

In its default setting, a LANCOM

LW-500

access point operated with LCOS LX automatically obtains its local IPv4 parameters (IP address, default gateway, DNS server) from a

local

DHCP server present in the local network.

This document describes how

to

you can perform a static IPv4 network configuration in

the LANCOM LW-500

LCOS LX.

Requirements:

LCOS LX as of version 4.0 (download)

LANtools version 10.30 or later (download)

LANCOM LW-500

Access Point with LCOS LX

1) Procedure with LANconfig:

1.1) In LANconfig, open the configuration dialog for the LW-500 and switch to the menu item IP configuration -> LAN interfaces.

Image Removed

Image Added

1.2) In this example, we create a static IPv4 configuration for the default LAN interface INTRANET.

Set the IPv4 address source to the value static.

Use the field Static IPv4 address to assign an IP address in the CIDR notation (e.g., 192.168.

50

66.

23

124/24 for a class-C network).

Image Removed

Image Added

1.3) Open the menu IP configuration -> Static parameters.

Image Removed

Image Added

1.4) For the default interface INTRANET, assign the other IP parameters such as the default gateway and a primary and/or secondary DNS server.

Image Removed

Image Added

1.5) Write the configuration back to the access point.

2) Procedure with WEBconfig:

2.1) Open the configuration of the LW-500 in WEBconfig and login with the username root and the main device password.

2.2) Switch to the menu System configuration and click on the link Adjust the network settings of this device.