Configuring static IPv4 parameters in the LANCOM LW-500

Description:

By default, a LANCOM LW-500 access point automatically obtains its local IPv4 parameters (IP address, default gateway, DNS server) from a local DHCP server.

This document describes how to perform a static IPv4 network configuration in the LANCOM LW-500.

Requirements:

LCOS LX as of version 4.0 (download)

LANtools version 10.30 or later (download)

LANCOM LW-500

1) Procedure with LANconfig:

1.1) In LANconfig, open the configuration dialog for the LW-500 and switch to the menu item IP configuration -> LAN interfaces.

1.2) In this example, we create a static IPv4 configuration for the default LAN interface INTRANET.

Set the IPv4 address source to the value static.

Use the field Static IPv4 address to assign an IP address in the CIDR notation (e.g., 192.168.50.23/24 for a class-C network).

1.3) Open the menu IP configuration -> Static parameters.

1.4) For the default interface INTRANET, assign the other IP parameters such as the default gateway and a primary and/or secondary DNS server.

1.5) Write the configuration back to the access point.

2) Procedure with WEBconfig:

2.1) Open the configuration of the LW-500 in WEBconfig and login with the username root and the main device password.

2.2) Switch to the menu System configuration and click on the link Adjust the network settings of this device.

2.3) Set the IPv4 settings to static.

Use the field IPv4 address to assign an IP address in the CIDR notation (e.g., 192.168.50.23/24 for a class-C network).

Assign the other IP parameters such as the IPv4 gateway and a primary and/or secondary DNS server.

2.4) Click on Confirm to write the configuration back to the access point.

Seitenhierarchie

Service & Support

Links