Description:

This article describes how a firmware update can be performed on an access point with LCOS LX operating system.

Note that   the device will restart following a firmware update. Perform the firmware update only when a brief loss of the device functions is practicable.

Separate release processes exist for firmware versions that are provided via the Auto Updater, the software update in LANconfig/WEBconfig, and the LANCOM Management Cloud. As a result, new firmware versions on these platforms are available slightly later.

Requirements:


Procedure:

1) Update using the Auto Updater integrated in LCOS:

LANCOM routers and access points offer an Auto Updater feature for firmware versions as of LCOS 10.20. This enables devices to keep their firmware up to date independently. The device has to be connected to the Internet for this.

1.1) Open the device configuration in LANconfig, navigate to the menu  Management → Software update  and adapt the parameters to your individual needs.


2) Firmware update via LANconfig:

2.1) Firmware update via the LANconfig Online Updater:

2.1.1) Mark the device in LANconfig,  right-click  on the device and, in the context menu, select  Firmware management →   Check for Firmware Updates.

2.1.2) Make sure, that Search updates online is active and click OK.

2.1.3) Select the firmware version and click Download to perform the update.


2.2) Manual firmware update via LANconfig:

2.2.1) Download the firmware from the download area and save it to your PC. 

2.2.2) Mark the device in LANconfig,  right-click  on the device and, in the context menu, select  Firmware management → Upload new firmware .

2.2.3) Select the firmware downloaded in step 2.2.1 and click  Open to perform the update.


3) Firmware update via WEBconfig:

3.1) Connect to the device via the web interface (WEBconfig) and click on the Firmware version in the  Dashboard.

As an alternative you can also click on the three dots and select Upgrade firmware.

3.2) The access point automatically searches for the current firmware (Internet connection of the access points is necessary). Click Update now to perform the firmware update.

As an alternative you can also download the firmware from the download area and upload it manually by selecting the file via the button Select file and clicking on Upload and Update afterwards


4) Central firmware management by WLAN controller:

In a WLAN controller scenario, the firmware of managed access points and Wi-Fi routers can be updated by the WLAN controller.

Instructions are available in  this Knowledge Base article.


5) Firmware update via the LANCOM Management Cloud:

Devices managed by the LANCOM Management Cloud (LMC) can receive firmware updates via the LMC.

5.1) Login to the LMC and click on  Devices.

5.2) Mark the device to be updated, click on the three dots in the upper right corner, and select  Firmware update.