Description:

This article describes how to read out the dynamic public IP addresses on a LANCOM router.


Option 1:
1. Start LANmonitor and click on the plus sign for the connection to the provider:
2. Click on Protocols and 'Network protocol: IPv4'. The IP address assigned by the provider is displayed under 'Own IP address'.

Option 2:
1. Start your Web browser from within the LANconfig software.
2. Mark the device and access the context menu for Device → WEBconfig/Console session → Open Web browser or enter the router IP into your Web browser and select the item LCOS Menu Tree. The relevant path is Status/PPP/Rx options/IPCP.

Option 3:
1. Start Telnet/SSH from the LANconfig software: Mark the device and access the context menu for Device → WEBconfig/Console session → Telnet or SSH session.
2. After entering the password, enter the following command to display IP addresses assigned via PPPoE.:
ls Status/PPP/Rx-Options/IPCP/

If you are using a DHCPoE connection (e.g. with a cable modem), the dynamically assigned IP address can be read out with the following telnet command:

ls /Status/DHCP-Client/WAN-IP-List