Description: This article describes how to set up an ADSL connection via an upstream DSL modem on a Unified Firewall without specifying a VLAN ID (PPPoE) and assign it to an Internet object on the desktop. Requirements: - LANCOM R&S® Unified Firewall with firmware as of version 10.2
- Internet access via upstream DSL modem
- Web browser for configuring the Unified Firewall.
The following browsers are supported:
- Google Chrome
- Chromium
- Mozilla Firefox
Procedure: 1) Setting up the network connection for Internet access: 1.1) Open the configuration interface of the Unified Firewall in your browser, change to the menu Network → Connections → Network Connections and click on the chevron icon to enter the advanced view. 1.2) Delete the entry for the interface eth0.
By default the interface eth0 is set to DHCP. |
1.3) Navigate to the menu Network → Interfaces → PPP Interfaces and click on the “+” icon to create a new PPP interface. 1.4) From the drop-down menu Master Interface, select the interface eth0. 1.5) Change to the menu Network → Connections → PPP Connections and click on the “+” icon under PPP Connections to create a new entry. 1.6) Enter the following parameters: - Name: Enter a descriptive name.
- Interface: Select the PPP interface created in step 1.4.
- Type: Check that the value is set to PPPoE.
- Username: Enter Username for DSL dial-in assigned to you by your provider.
- Password: Enter the password for DSL dial-in assigned to you by your provider.
2) Create a desktop object for the Internet connection: 2.1) Click the button to Create an Internet object. 2.2) Enter the following parameters: - Object Name: Enter a descriptive name.
- Connections: From the drop-down menu, select the PPP Connection created in step 1.6 and click on the “+” icon to add the object.
3) Saving and activating the configuration steps: 3.1) Click on the Activate button to accept the changes and enable filtering. |