Description:

This document describes the steps necessary to update LANCOM GS-23xx series switches to a firmware version 3.17.


Requirements:
  • LANCOM switch of the GS-23xx series
  • Switch firmware version 3.17 (download)


Procedures:


1) LANCOM switches of the type GS-2326(+)/GS-2326P(+), GS-2352 and GS-2310P:
  • Switches operating with firmware versions 2.xx - 2.83 can update directly to a firmware version 3.17 without further action.



2) LANCOM GS-2352P:
  • If the switch is operating with firmware of version 2.xx - 2.83, it can be directly updated to a version 3.17 without further action.
  • If during the firmware update the notice "firmware too big" should appear, you must first carry out an interim update to firmware version 3.04a.

    You can then update the device firmware to a version 3.17 without further action.