Description:
This article describes how to create a Wireshark trace on an LCOS LX Access Point via WEBconfig.
Requirements:
- LCOS LX as of version 5.30 Rel (download latest version)
- Any web browser for accessing WEBconfig
Procedure:
1) Connect to the Access Point via WEBconfig and go to the menu Diagnosiw → Packet capturing.
2) In the dropdown menu Interface-Selection select the interface you want a Wireshark trace to be created for and click Create and start capture afterwards.
It is also possible to create Wireshark traces for additional interfaces simultaneously. Repeat this step for an additional interface in order to do so.
3) The following actions can be used after starting the trace:
- By clicking the "Stop" symbol the trace is stopped.
- By clicking the "Garbage can" symbol the trace is aborted.
4) the following actions can be used after clicking the "Stop symbol":
- Mit einem Klick auf das "Download-Symbol" kann der Trace vom Gerät heruntergeladen und abgespeichert werden.
- Mit einem Klick auf das "Mülltonnen-Symbol" wird der Trace gelöscht.
