Recording a trace with a prefabricated trace configuration

Description:

This document describes how to use a prefabricated trace configuration to record a trace using LANtracer.

Requirements:

LCOS as of version 8 (download latest version)
LANtools as of version 8 (download latest version)

Procedure:

1) Start LANtracer by right-clicking with the mouse on the device in LANconfig and selecting the option Create trace output.

2) In the File menu, select the menu item Load trace config.

3) Select the file with the trace configuration and click on Open.

4) In the button bar, click the button with the green arrow to start tracing.

5) To stop the tracing, click the stop button.

6) Save the recorded trace data with menu item File -> Save trace data/support configuration.

The trace data is stored in the file with the extension *.lct, and the support configuration in the file with the extension *.spf.

The LANCOM Support department requires both files for analysis.

Seitenhierarchie

Service & Support

Links