Skip to end of metadata
Go to start of metadata


Description:

This article describes the function of the reset button on a LANCOM R&S®Unified Firewall.

The reset button is embedded in the device and therefore has to be activated with a pointed object (e.g. a paper clip).


ModelFunction of the reset button
UF-50Short pressure leads to a restart of the device.
UF-100No function
UF-200No function
UF-300

With short pressure the device can be switched on (if the power switch is active).

Pressure longer than 5 seconds leads to a shut-down of the device. Thereby the reset button functions as a power button.

UF-500No function
UF-910No function