Description:
This document describes how to set up a
IKEv2 VPN connection between a
LANCOM router and the
LANCOM Advanced VPN Client.
Requirements:Procedure:1) Start the
Setup Wizard on the LANCOM router in
LANconfig and select the option
Provide remote access (RAS, VPN).
2) We configure an
IKEv2 VPN connection.3) In the following dialog, select the client
LANCOM Advanced VPN Client. A simplified setup procedure is available with the option
1-Click-VPN.
Information:In the case of 1-Click-VPN, all required keys (e.g. the preshared key) are automatically created by random number generator. The wizard also will deduce most of the settings required for the VPN connection from the settings in the LANCOM router.
4) Enter a
name for the VPN client connection. You must also set the the
address of this router to its
public IP address or a
DynDNS address of the LANCOM router.
5) Choose an
ip address range which will be used by all users that dial in on the LANCOM Router using this VPN connection.
6) In the next dialog window, click on the
Browse... button to set a
location to save the profile file.
7) The
Finish button exits the configuration wizard. The configuration is uploaded to the LANCOM router and the
profile file is saved to your PC.
Import the VPN Client profile into the LANCOM Advanced VPN Client:1) Start the
LANCOM Advanced VPN Client and open the menu
Configuration-> Profiles.
2) Click the button
Add/Import.
3) Select the option
Profile import.
4) Enter the
path to the import file (*.ini).
5) In the next dialog window, click on
Next.
6) A message is displayed after a successful profile import. Click on
Finish to complete the import.
7) Click on the
OK button to save your settings.
8) The
VPN Client connection can now be established with a
click on the Connection switch.