Description:
This article describes how to reset the volume budget according to a schedule.
Requirements:
Procedure:
Cron table operations are time dependent, so it is necessary to synchronize the time via the router's NTP client.
1) To do this, configure an NTP server in the router under Configuration -> Date & Time -> Synchronization and select the option Synchronize to a time server using NTP at regular intervals.
2) Then click on the Time server button and add one or more time servers to the list.
3) You then make the following entry in the menu Configuration -> Date & Time -> General -> Cron table.
Note:
Please check which language the Telnet or SSH terminal program is set to. The CLI commands need to be adapted accordingly.
The CLI command is do Setup/Charges/Reset-Budgets
|
|
