Description:
This article describes how to manually adjust the internal IPv4 address of the router.



Procedure:

1) Switch to the menu IPv4 -> General -> IP networks.



2) Select the network you wish to customize and click Edit.



3) Assign the network parameters (IP address and Netmask).



4) If necessary, add more networks with a click on Add.

Important:
Do not delete the standard networks INTRANET and DMZ as they are referenced in numerous sub-menus.

If the IP network is missing, LANconfig will be unable to write the configuration back to the device!



All LANCOM products and software versions are subject to LANCOM Software Lifecycle Management.
You can find information on our website at https://www.lancom-systems.com/products/firmware/software-lifecycle-management

© 2019-2024 LANCOM Systems GmbH