Skip to end of metadata
Go to start of metadata


Description:

This document contains notes on commissioning the LANCOM R&S®Unified Firewalls without the integrated setup assistent


Requirements:
  • Any web browser for access to the web interface of the Unified Firewall


Configuration:

The configuration of your LANCOM R&S®Unified Firewalls is done via a web client.

First make sure that the network adapter of your configuration PC is configured for retrieving an IP address automatically.

Log in to this web client with a current browser (we recommend Google Chrome™).

For this purpose, the interface LAN1/eth1 of the firewall is preconfigured with the following IP address:
  • LAN1/eth1 – 192.168.1.254/24


You can reach the web client via HTTPS on port 3438.

If you have connected the PC via interface LAN1/eth1, you can reach the firewall‘s web client at https://192.168.1.254:3438/.

With a LANCOM R&S®Unified Firewall 260 you have to use the LAN2/eth2 interface and the IP address https://192.168.2.254:3438!



For the first login, please use the following credentials:

  • User: admin
  • Password: admin


Updating the firmware:

Your R&S®Unified Firewall was delivered with the latest firmware at the time of production. Please check for
updates by proceeding as follows:
  • First, you need to connect to the Internet. Follow the steps in the Getting Started chapter of the manual. The manual is linked to the login page of the web client. You can also find it in the Help menu of the webclient.
  • Once the internet connection is set up, go to Firewall -> Updates Settings and then refresh the updates list. You receive a list of available firmware updates for your LANCOM R&S® Unified Firewalls that can be installed.