When setting up one or more WAN connections on the LANCOM vRouter, please observe the instructions in this document.
Requirements: - The LANCOM vRouter is available as an OVA file (download).
- VMware ESXi 6.0.0 or higher is running on a server with the Intel XEON processor with the AES extended instruction set (Intel AES-NI) and hardware virtualization (Intel VT-x).
- VMware vSphere Client 6.0.0 or later must be installed on the device that is used to access the VMware ESXi server.
- The virtual machine must meet the following minimum requirements:
- 1 virtual x86 CPU
- 512 MiB RAM
- 512 MiB hard drive memory
- 1–5 virtual network interfaces based on VMXnet3
1) WAN connection(s) via separate physical uplinks: 1.1) When one or more WAN links are connected via separate physical uplinks (e.g. ETH-1 = DSL-1, ETH-2 = DSL-2, etc.), the MAC address type in the configuration for each WAN remote station must be set to the parameter Global.