Beschreibung:
In der Konfiguration von LANCOM Access Points und WLAN Routern (nur LCOS) kann im Menü Wireless-LAN → Allgemein eine E-Mail Adresse hinterlegt werden, an welche eine Benachrichtigung versendet wird, sobald ein Ereignis bei einem WLAN-Modul auftritt.
Dieses Dokument enthält eine Auflistung der WLAN-Ereignisse, für welche eine E-Mail Benachrichtigung versendet wird.

Es ist nicht möglich, einzelne Ereignisse für eine Benachrichtigung auszuwählen.

Für einen erfolgreichen E-Mail-Versand muss der Bereich Meldungen → SMTP-Konto konfiguriert sein. Eine Anleitung erhalten Sie in diesem Knowledge Base Dokument.

Die "Rogue Client Detection" meldet keine Ereignisse über diese Schnittstelle.

 



Ereignis auf einem WLAN-Modul

Bemerkung

Local access check for <Name> failed

RADIUS access check for <Name> failed

RADIUS access check for <Name> timed out

Disassociated WLAN station due to station request

Disassociated WLAN station due to client steering decision

Disassociated WLAN station due to RADIUS request

Rejected Authentication from WLAN station

Ignored Authentication from WLAN station

Rejected Association from WLAN station

Ignored Association from WLAN station

Requested WLAN station to steer away

Steering of WLAN station manually triggered

BSS Transition Management Request rejected by WLAN station

WLAN error

Disassociated WLAN station due to idle timeout

Disassociated WLAN station due to supervision

Disassociated WLAN station due to admin request

Channel change due to radar interference

Channel change due to slave radar report

Channel change due to slave radar report on extension channel

Channel change due to slave radar report on lower 40 MHz extension channel

Channel change due to slave radar report on upper 40 MHz extension channel

Channel change due to master bandwidth change

Reported radar signal to master

Starting DFS channel availability check

WLAN protocol error communicating with <Name>

Timeout in key handshake with peer <Name>

Key handshake with peer failed

WLAN station failed 802.1X authentication

WPS negotiation with <Name> completed

WPS negotiation with <Name> failed

Determined IPv4 address for station <Name>

Determined IPv6 address for station <Name>

WLAN station did not report privacy, might not work

WLAN station roamed away

Connected WLAN station

TKIP Michael failure communicating with partner <Name>

TKIP Michael failure reported by partner <Name>

Lost connection to WLAN AP

Authentication to WLAN AP failed

Association to WLAN AP failed

Reassociation to WLAN AP failed

802.1X authentication with <Name> failed

Connected to BSSID

Temperature too high, disabling interface

Temperature low enough, enabling interface

Temperature too low, disabling interface

Temperature high enough, enabling interface

Length of SupportedRates element (9) exceeds allowed length(8)

Dieses Ereignis fällt unter "Protocol Error" und wird gemeldet.

Beacons konnten nicht gesendet werden (üblicherweise, weil das Medium zu voll ist)

Dieses Ereignis fällt unter "WLAN Error" und wird gemeldet.