Versionen im Vergleich

Schlüssel

  • Diese Zeile wurde hinzugefügt.
  • Diese Zeile wurde entfernt.
  • Formatierung wurde geändert.
Seiteneigenschaften


Description:

This article describes how the configuration of an XS series switch can be exported and imported via the webinterface.

Info

The procedure for the configuration import / export for an XS series switch via SCP is described in this Knowledge Base article.

The procedure for the configuration import / export for an XS series switch via LANconfig is described in this Knowledge Base article.


Requirements:


Procedure:

1) Saving the switch configuration:

1.1) Connect to the switch via the webinterface and switch to the menu System → Utilities → Transfer.

1.2) Click the Upload button for HTTP.  

Info

The Up- and Download is to be understood from the point of view of the device. Therefore the Upload stands for the download of a configuration or log files to a computer drive. The Download stands for the upload of a configuration file or a script file to the switch.

1.3) Select the following parameters, click Begin Transfer and select the save location afterwards:

  • File Type: In the dropdown menu select the option Startup Configuration.
  • File Name: In the dropdown menu enter a descriptive name (in this example XS-5110_Configuration).


2) Uploading the switch configuration:

2.1) Connect to the switch via the webinterface and switch to the menu System → Utilities → Transfer.

2.2) Click the Download button for HTTP.  

Info

The Up- and Download is to be understood from the point of view of the device. Therefore the Upload stands for the download of a configuration or log files to a computer drive. The Download stands for the upload of a configuration file or a script file to the switch.

2.3)  Select the following parameters and click Begin Transfer:

  • File Type: In the dropdown menu select the option Startup Configuration.
  • Select File: Select a saved configuration file (in this example XS-5110_Configuration).

2.4) Switch to the menu System → Configuration Storage → Reload.

2.5) Click Reload in order for the start configuration to be set active.

Info

As an alternative you can also activate the start configuration via the CLI with the command reload configuration.