...
- LCOS as of version 9.24 (download latest version)
- LANtools as of version 9.24 (download latest version)
- SSH client for command-line access (e.g. PuTTY)
...
2) Under Configuration access ways open the menu Access rights → From a WAN interface.
3) Under Protocols, use the drop-down menus to set the options SSH and HTTPS to allowed, which enables access to the router.
...
- IP address: Enter the network address of the local network (in this example 192.168.1.0).
- Netmask: Enter the subnet mask of the local network (in this example 255.255.255.0).
- Routing tag: Leave the setting as the default value 0.
- Comment: Optionally enter a descriptive comment.
Info |
---|
If necessary, repeat this step for further local networks. |
...
- IP address: Enter the IP address 212.117.89.9.
- Netmask: Enter the netmask 255.255.255. This 255. This stands for a single IP address.
- Routing tag: Leave the setting as the default value 0.
- Comment: Optionally enter a descriptive comment.
10) Create a new entry for the LANCOM Support to access to the router via SSH and HTTPS. Modify the following parameters:
- IP address: Enter the IP address 217.6.21.90.
- Netmask: Enter the netmask 255.255.255.255. This stands for a single IP address.
- Routing tag: Leave the setting as the default value 0.
- Comment: Optionally enter a descriptive comment.
...
- IP address: Enter the IP address 62.153.130.132.
- Netmask: Enter the netmask 255.255.255.255. This stands for a single IP address.
- Routing tag: Leave the setting as the default value 0.
- Comment: Optionally enter a descriptive comment.
...