...
Step 1: Configuring stacking on the switch ports
| Info |
|---|
Do not connect the switches with the stacking cables yet but configure stacking on the switches first! |
When configuring stacking the stacking ports can be operated exclusively with the native port speed. Therefore with stacking it is not possible to use an SFP module with a lower speed than the native port speed on these ports (e.g. a 1 GBit SFP module on a 10 GBit port). |
1.1 Open the configuration of the switches that are to operate in the stack and navigate to the menu Stacking → Base → Port Configuration.
...