Versionen im Vergleich

Schlüssel

  • Diese Zeile wurde hinzugefügt.
  • Diese Zeile wurde entfernt.
  • Formatierung wurde geändert.

...

  • Invalid: The error parameter under Info must be adjusted or deleted.
  • Changed: Settings were changed on the synchronization nodes (such as the IP address). On the device with the current configuration (master), execute the command do/Status/Config/Sync/New-Cluster launch or use the context menu in LANconfig to select the option Activate Configuration Synchronization Settings to restart the Config Sync.
  • Not-running: Config Sync has never been started. On the device with the current configuration (master), execute the command do/Status/Config/Sync/New-Cluster launch /Launch or use the context menu in LANconfig to select the option Activate Configuration Synchronization Settings to start the Config Sync.

...

When using the table "Access stations" in the menu Management → Admin → Access settings → Configuration access ways the IP address (e.g. IP address 192.168.1.1 Netmask 255.255.255.255) or the whole network of the other WLAN Controller (e.g. IP address 192.168.1.0 Netmask 255.255.255.0) has to be entered in the table in order for the devices to be able to communicate with each other!

...