...
10. The device model "virtio" must be set as the network adapter. Then click "Apply".
11. The disk bus "sataVirtIO" must be set for the hard disk. Then click "Apply".
12. Click on "Add Hardware".
13. Add a serial adapter, select "Unix socket (unix)" as the device type and enter e.g. in the Path field the path "/tmp/vrouter_socket" (can be chosen freely). Then click on "Finish".
...
14. Click on "Add Hardware" again.
15. Add another serial adapter, select "Output to a file (file)" as the device type and enter e.g. in the Path field the path "/tmp/vrouter_bootlog" (can be chosen freely). Then click on "Finish".
...
16. Click on "Begin installation" to start the installation of the LANCOM vRouter.