Versionen im Vergleich

Schlüssel

  • Diese Zeile wurde hinzugefügt.
  • Diese Zeile wurde entfernt.
  • Formatierung wurde geändert.

...

Description:

In LCOS LX 5.20 wurde u.A. die WLAN-Controller Unterstützung sowie amonst other things WLAN controller support as well as LEPS-MAC implementiert. Bei der Konfiguration der neuen Features müssen ein paar wichtige Punkte beachtet werden.Dieser Artikel enthält wichtige Hinweise zur Konfiguration der neuen Featureshave been introduced. When configuring the new features several important details have to be considered.

This article contains important details regarding the configuration of the new features.


Requirements:


WLAN -Management mit management with WLC: Betriebsmodus

Auf Access Points mit LCOS LX gibt es keinen Schalter, mit dem der Betriebsmodus zwischen "Standalone-Betrieb" und "Verwaltung durch einen WLAN-Controller" für einzelne WLAN-Module gewechselt werden kann. Stattdessen kann die Unterstützung nur global für den Access Point in dem Menü Wireless-LAN → WLC durch den Schalter Betrieb mit WLC aktiv aktiviert bzw. deaktiviert werden.

Info

Soll der Access Point manuell konfiguriert oder durch die LANCOM Management Cloud verwaltet werden, muss der Schalter Betrieb mit WLC aktiv auf Nein gesetzt werden.

Es ist geplant in einer zukünftigen Firmware-Version das WLAN-Management auf dem Access Point nach Ablauf einer gewissen Zeitspanne, in der kein WLAN-Controller gefunden wurde, automatisch zu deaktivieren.

Image Removed

WLAN-Management mit WLC: Kein unverschlüsselter Kontrollkanal

Operating mode

On access points with LCOS LX there is no switch to change the operation mode between "Standalone" and "Managed by a WLAN controller" for individual radio modules. Instead the WLAN controller support can only be activated or deactivated globally in the menu Wireless-LAN → WLC via the switch Operating with WLC.

Info

If the access point should be configured manually, the switch Operating with WLC has to be set to No.

If the access point is connected to the LMC and receives a WLAN profile, the switch Operating with WLC is set to No automatically by the LMC.


Info
Informations on the supported WLC features are available in this knowledge base document.

Image Added


WLAN management with WLC: No unencrypted Control channel

Access points with LCOS LX don't support an unencrypted Control channel. Therefore the Control channel encryption in the WLAN controller has to be set to Default or DTLS for the LCOS LX access points in the menu WLAN Controller → AP Configuration → Access point table. This applies for separate profiles as well as the default profile Access Points mit LCOS LX unterstützen keinen unverschlüsselten Kontrollkanal. Daher muss im WLAN-Controller in dem Menü WLAN-Controller → AP-Konfiguration → Access-Point-Tabelle in den Einträgen für die betroffenen Access Points die Kontrollkanal-Verschlüssel. auf Default oder DTLS gesetzt werden. Dies gilt für separate Profile als auch für das Default-Profil ff:ff:ff:ff:ff:ff.    

Info

Der Eintrag Default verweist im Standard auf DTLS. Dies kann in WEBconfig oder auf der Konsole geändert bzw. überprüft werdenThe entry Default is set to DTLS ex factory. This setting can be verified or changed via WEBconfig or the CLI.

WEBconfig:
Extras → LCOS -Menübaum → Menu Tree→ Setup → WLAN-Management → AP-Konfiguration → Kontrollkanalverschluesselungs-Default Configuration → Control-Connection-Encryption-default

CLI Konsole:
Setup/WLAN-Management/AP-Configuration/Control-Connection-Encryption-default 

Image Modified


LEPS-MAC: Format der of the MAC -Adresseaddress

When configuring Bei Verwendung von LEPS-MAC muss bei der Konfiguration per via LANconfig in dem Menü the menu Wireless-LAN → StationenStations/LEPS → Benutzer die MAC-Adresse in dem Format Users the MAC address has to be entered in the format aa:bb:cc:dd:ee:ff angegeben werden. 

Info

Das gleiche Format muss auch bei der Konfiguration per Konsole verwendet werdenThe same format has to be used when configuring this feature via the CLI.

Image Modified