...
- Option number: The value 121 must be entered here.
- Network name: Select here the name of the network to which the settings are to apply. If you leave this field empty, the DHCP option applies to all networks.
- Type: Choose the data type 8-bit integer.
- Value: Enter the routing information as a hexadecimal value in the format <Netmask in Bit><Destination network><Gateway IP> ein. The Netmask as well as the individual octets of the Destination network and the Gateway IP each have to be separated by a comma. For designation as a hexidecimal value each entry every number has to be preceded by 0x.
- Example: 0x10,0x0A,0x00,0xC0,0xA8,0x02,0x01
This would use a 16-bit netmask, the destination network would have the address range 10.0.0.0 and the gateway would have the IP address 192.168.2.1.
- Example: 0x10,0x0A,0x00,0xC0,0xA8,0x02,0x01
Info |
---|
Look on the Internet for online tools for calculating hex values. Multiple routing entries can be added by entering them in sequence. Example: |
1.3) Save your entries with OK and write the configuration back to the LANCOM router.
...