...
Two branches (Branch Office 1 and Branch Office 2) each establish a VPN connection to the Headquarters Headquarter.
The following networks are available on the routers:
...
Procedure:
1) Configuring the HeadquartersHeadquarter:
1.1) Setting up the VPN connection:
...
1.2.1) In LANconfig, open the configuration of the router at the Headquarters and Headquarter and switch to the menu item IP router → Routing → IPv4 routing table.
...
- IP address: Enter the network address of thethe second network at branch office 1, to which communication is to take place via the VPN connection (in this example the network VOIP).
- Netmask: If necessary, adjust the Netmask.
- Routing tag: Enter the ARF tag that belongs to the network (in this example, tag 2).
...
- IP address: Enter the network address of thethe third network at branch office 1, to which communication is to take place via the VPN connection (in this example the network SERVER).
- Netmask: If necessary, adjust the Netmask.
- Routing tag: Enter the ARF tag that belongs to the network (in this example, tag 3).
...
1.3.10) This concludes the configuration at the headquarters headquarter. Write the configuration back to the router.
...
- IP address: Enter the network address of thethe second network at Headquarters, to which communication is to take place via the VPN connection (in this example the network VOIP).
- Netmask: If necessary, adjust the Netmask.
- Routing tag: Enter the ARF tag that belongs to the network (in this example, tag 2).
...
- IP address: Enter the network address of thethe third network at Headquarters Headquarter, to which communication is to take place via the VPN connection (in this example the network SERVER).
- Netmask: If necessary, adjust the Netmask.
- Routing tag: Enter the ARF tag that belongs to the network (in this example, tag 3).
...
- Name: Enter a descriptive name.
- Routing tag list: Enter the ARF tags of the networks to be transmitted via the VPN connection HEADQUARTERSHEADQUARTER. Multiple ARF tags can be comma separated
...
3.2.2) Select the routing entry of the VPN connection HEADQUARTERS HEADQUARTER and click on Edit.
3.2.3) Enter the ARF tag used by this network at the remote site (in this example tag 1).
...
- IP address: Enter the network address of thethe second network at Headquarters Headquarter, to which communication is to take place via the VPN connection (in this example the network VOIP).
- Netmask: If necessary, adjust the Netmask.
- Routing tag: Enter the ARF tag that belongs to the network (in this example, tag 2).
...
- IP address: Enter the network address of thethe fourth network at the HeadquartersHeadquarter, to which communication is to take place via the VPN connection (in this example the network ADMINISTRATION).
- Netmask: If necessary, adjust the Netmask.
- Routing tag: Enter the ARF tag that belongs to the network (in this example, tag 4).
...
- Name: Enter a descriptive name.
- Routing tag list: Enter the ARF tags of the networks to be transmitted via the VPN connection HEADQUARTERSHEADQUARTER. Multiple ARF tags can be comma separated.
...
3.3.5) Select the VPN connection HEADQUARTERS HEADQUARTER and click on Edit.
3.3.6) For HSVPN, use the drop-down menu to select the HSVPN profile created in Step 3.3.3.
...