...
This article describes how to configure an SNMP user on an XS series switch and monitor the switch with the LANmonitor via SNMPv3. Of course It is also possible to use any other monitoring tool which supports SNMPv3.
| Info |
|---|
If another a monitoring tool other than LANmonitor is used, it is possible, that some parameters have to be configured dfifferently differently (e.g. the encryption). Please contact the respective manufacturer regarding the necessary settings. |
...
1.4) Click on Save Configuration in the upper right corner to save the configuration as the start configuration.
| Info |
|---|
The start configuration is retained even if the device is restarted or there is a power failure. |
...
1.5) Acknowledge the save process by clicking OK.
2.1) Connect to the switch via the LANmonitor, make sure, that the protocol SNMP3 is selected and enter the login credentials for the SNMP user entered in step 1.3).
2.2) The switch can now be monitored via the LANmonitor and various status information can be read out. If write permissions are given, individual ports can be deactivated and reactivated, for example.
...