Versionen im Vergleich

Alte Version 10

changes.mady.by.user LANCOM Redaktion

Gespeichert am

verglichen mit

Neue Version Aktuell

changes.mady.by.user LANCOM Redaktion

Gespeichert am

Schlüssel

  • Diese Zeile wurde hinzugefügt.
  • Diese Zeile wurde entfernt.
  • Formatierung wurde geändert.

...

Info
  • The procedures described below are based on a fully functional network scenario with some components managed by the LMC.
  • The gateway router is not managed by the LMC.
Info

How to configure a cloud-managed hotspot where all LANCOM devices are managed by the LMC is described in this knowledge base article.

How to configure a cloud-managed hotspot where only the LANCOM access points are managed by the LMC is described in this knowledge base article.

Scenario:

A company’s local network is operated with LANCOM access points and switches and is managed by the LANCOM Management Cloud, with the exception of the gateway router:

...

  • SSID name: Enter a name for the broadcast SSID (e.g. HOTSPOT). This can be max. 16 characters long.
  • Global IP range: This field specifies the IP address range used by the hotspot network. Enter the IP address range in CIDR notation (e.g. 192.168.67.0/24).
  • VLAN ID: The VLAN ID is set to 999 by default. You can change this as you wish (in the range from VLAN ID 2 to 4094).The hotspot gateway is not managed by LMC: You must activate this option. Note that the VLAN configuration has to make the gateway router a member

2.4) At this point you can save the settings of the hotspot network.

Image Added

2.4) At this point you can save the settings of the hotspot network.5) In the Advanced Settings you must now activate the option For the hotspot network no router (gateway) is managed by the LMC.

Image Added

2.6) Save the settings again.Image Removed

2.5) The remainder of the configuration areas are for optional adjustments to the appearance and functionality.

  • If, for example, you want access to the hotspot network to require password authentication, change the function in the Authentication area to Password and assign a global password for to accessing the hotspot.
  • If you want to use voucher authentication, select the option provided. For a description of the configuration, see this Knowledge Base article.
Info
  • It is not possible to use separate access credentials for individual users.
  • Users accessing the hotspot are automatically logged off after 24 hours, after which they need to authenticate again.

Image Removed

  • You can define the time after which a user is automatically logged out of the hotspot.

Image Added

2.72.6) Save your settings.

2.78) In the Switches section you specify the switch ports used to carry the new hotspot network. The selected ports are shown in the color of the hotspot network.

2.89) Then click on Save.

Info

If your network does not use a switch and the access points are directly connected to the LANCOM router by Ethernet cable, you can skip this step of the configuration.

2.910) Navigate to the menu Sites → Networks and select the site you are configuring.

2.1011) Click the button Assign networks and select the hotspot network from the displayed list.

2.1112) In the final step, the new network configuration is rolled out to all devices on your local network.

  • Switch to the Devices menu and roll out the configuration to all devices with a configuration status shown as “Outdated” since configuring the hotspot. This may take some time depending on the number of devices involved.

2.1213) This concludes the configuration of the cloud-managed hotspot. Your Wi-Fi will now broadcast a new SSID with the name of your hotspot network. As soon as you connect to this SSID, you will be asked to login to the network.

...