...
1) Modifying the "Allowed Access VLANs" in the "Global VLAN Configuration":
1.1) Ho Go to the menu VLAN Management → VLAN Configuration.
1.2 Unter dem Punkt Under Global VLAN Configuration dürfen in dem Feld only VLAN IDs must be entered in the field Allowed Access VLANsnur VLAN-IDs hinterlegt werden, für die es einen Port mit dem Tagging-Modus Access gibt (in diesem Beispiel die VLAN-, which are assigned to aport with the tagging mode Access (in this example the VLAN IDs 1,2 und and 5).
Hinweis |
---|
Unter keinen Umständen dürfen in dem Feld Under no circumstances should all VLAN IDs from 1-4094 be entered in the field "Allowed Access VLANs" alle VLAN-IDs von 1-4094 hinterlegt werden, da dies ansonsten zu dem oben beschriebenen Verhalten führt, as this would lead to the behaviour described above! |
2.Anpassen der ) Modifying the "Allowed VLANs" in der the "Port VLAN Configuration":
2.1 Wechseln Sie in das Menü ) Go to the menu VLAN Management → VLAN Configuration.
2.2 Unter dem Punkt ) Under Port VLAN Configuration werden die Allowed VLANs bei Anpassung des Mode auf Hybrid oder Trunk automatisch auf the Allowed VLANs are set to 1-4094 gesetzt (Standard-Einstellung), was zu dem oben beschriebenen Verhalten führen kann.automatically (default setting) when setting the Mode to Hybrid or Trunk, which can lead to the behaviour described above.
Info |
---|
It is currently in review if the default setting for Allowed VLANs can be changed to 1. |
Info |
Es wird aktuell geprüft, ob die Standard-Einstellung für die Allowed VLANs auf 1 gesetzt werden kann. |
2.3 Passen Sie daher das Feld ) Therefore modify the field Allowed VLANs so an, dass nur noch die tatsächlich verwendeten VLANs hinterlegt sind (in diesem Beispiel die VLAN-, so that only the used VLANs are entered (in this example the VLAN IDs 1,2 und and 5).