...
| Info |
|---|
Access points that are operated in a WLAN-Controller scenario must each be configured individually. A central configuration of the steps described here via a WLAN-Controller is not possible. This scenario can also be implemented with LCOS LX access points. |
Requirements:
- LANCOM router as the RADIUS server
- Access point with LCOS
- Switch of the GS-23xx series
- LCOS as of version 9.24 or 10.30 when using SWOS as of version 3.32 RU7 (download latest version)
- LANtools as of version 9.24 (download latest version), 10.40 RU1 when configuring the access point via LANconfig
- Any web browser for accessing the web interface of the GS-23xx and the access point
...
| Info |
|---|
With the option Port-based 802.1X, solely the access point should be able to authenticate itself. All other end devices connected via WLAN can communicate via the switch port without authentication. For this reason it is important to provide the WLAN end devices with their own network that is separated from the management network by VLAN. You can use this Knowledge Base article to help you here. |
2.3) Navigate to the menu Maintenance → Save/Restore → Save Start and click on Save so that the configuration is saved as a Start configuration.
...
cd /Setup/LAN/IEEE802.1x/Supplicant-Ifc-Setup
3.2) Go to the path for the LAN interface. For this example we are using interface LAN-1.
...
3.4) Use the following command to set the authentication method as PEAP/MSCHAPv2:
set Method PEAP/MSCHAPv2
| Info |
|---|
As an alternative, you can use the following script to upload the changes to the access point with LANconfig. Please be sure to add the relevant username and password to the file first. |