...
| Info |
|---|
Access points that are operated in a WLAN-Controller scenario must each be configured individually. A central configuration of the steps described here via a WLAN-Controller is not possible. This scenario can also be implemented with LCOS access points. |
Requirements:
- LANCOM router as the RADIUS server
- Access point with LCOS LX operating system:
- LW-500
- LW-600
- LX-640x
- Switch of the GS-3xxx series
- LCOS as of version 10.30 on the router which acts as RADIUS server (download latest version)
- LCOS LX as of version 5.20 RU2 (download latest version)
- LANtools as of version 10.30 (download latest version), 10.40 RU1 when configuring the access point via LANconfig
- Any web browser for accessing the web interface of the GS-3xxx and the access point
...
| Info |
|---|
With the option Port-based 802.1X, solely the access point should be able to authenticate itself. All other end devices connected via WLAN can communicate via the switch port without authentication. For this reason it is important to provide the WLAN end devices with their own network that is separated from the management network by VLAN. You can use this Knowledge Base article to help you here. |
2.5) Click the red disk symbol on the upper right side to save the configuration as Start configuration.
...