Seiteneigenschaften |
---|
Beschreibung:
Desription:
This document describes how to configure a load balancer for multiple WAN connections with the Dieses Dokument beschreibt, wie Sie in der LANCOM Management Cloud (LMC) einen Load-Balancer für mehrere WAN Verbindungen konfigurieren können.
VoraussetzungenRequirements:
- LCOS ab Version as of version 10.40 (download aktuelle Versionlatest version)
- Zugang zur LMC samt eigenem Projekt
- Bereits mit der LMC verbundener LANCOM Router samt gültiger LMC-Lizenz
- Bereits eingerichteter Standort mit zugewiesenem Netzwerk und Router
- Dem Router muss die Funktion Gateway zugewiesen sein
- Zwei oder mehrere eingerichtete und funktionsfähige Internet-Zugänge auf dem Router
- Die Internet-Zugänge können wie folgt eingerichtet werden:
- manuell auf dem Router per LANconfig / WEBconfig
- manuell per Detail-Konfiguration der LMC
- automatisch über LMC-Addins
- Die Internet-Zugänge können wie folgt eingerichtet werden:
- Web-Browser für den Zugriff auf die LMC
Vorgehensweise:
1. Öffnen Sie die Konfiguration Ihres Standortes und wechseln Sie in die Registerkarte WAN Verbindungen. In diesem Beispiel ist bereits eine WAN Verbindung in der Liste eingetragen.
2. Klicken Sie auf die Schaltfläche WAN Verbindung erstellen.
2. Wenn Sie auf die Schaltfläche Verbindungen klicken, werden Ihnen alle WAN Verbindungen angezeigt, die auf dem LANCOM Router eingerichtet sind.
Die zweite WAN Verbindung hat in diesem Beispiel den Namen INET_2 und soll in den Load-Balancer Verbund aufgenommen werden.
3. Klicken Sie auf die Schaltfläche Speichern.
4. Beide WAN Verbindungen werden nun in der Liste dargestellt.
5. Wechseln Sie in das Menü Geräte und wählen Sie den LANCOM Router aus, welcher als Gateway konfiguriert ist. Der Konfigurationsstatus dieses Gerätes wird mit "Nicht aktuell" dargestellt.
6. Wählen Sie aus dem Menü die Option Konfiguration ausrollen und bestätigen Sie die folgende Meldung mit Ausrollen.
7. Nach den Ausrollen der Konfiguration, sind beide WAN Verbindungen in einem Load-Balancer zusammen gefasst.
Dies können Sie z.B. kontrollieren, indem Sie den LANCOM Router in den LANmonitor laden.
- Access to the LMC including your own project
- LANCOM router already connected to the LMC including a valid LMC license
- Previously set up location with an assigned network and router
- The router must have the gateway feature assigned to it
- Two or more functioning Internet accesses on the router
- The Internet access can be set up as follows:
- Manually on the router using LANconfig / WEBconfig
- Manually by detailed configuration of the LMC
- Automatically via LMC add-ins
- The Internet access can be set up as follows:
- Web browser for accessing the LMC
Procedure:
1) Open the configuration for your location and switch to the tab WAN connections. In this example, the list already contains a WAN connection.
2) Click the button Create WAN connection.
3) If you click the Connections button, you will see all of the WAN connections set up on the LANCOM router.
The second WAN connection in this example has the name INET_2 and will be added to the load balancer network.
4) Click the Save button.
5) Now both WAN connections are shown in the list.
6) Switch to the Devices menu and choose the LANCOM router that is configured as the gateway. The configuration status of this device is shown as “Outdated”.
7) From the menu, select the option Configuration roll out and confirm the message that follows with Roll out.
8) After rolling out the configuration, the two WAN connections are combined in a load balancer.
Check this by loading the LANCOM router into the LANmonitor, for example.
Info |
---|
If you wish to add further WAN connections to the load balancer, repeat steps 1 to 6 accordingly |
Info |
Wenn Sie weitere WAN Verbindungen in den Load-Balancer aufnehmen wollen, wiederholen Sie die Schritte 1 bis 6 entsprechend. |