...
This article describes how to limit the bandwith for individual WiFi devices within an SSID.
Hinweis |
---|
On a stand-alone access point this feature is supported as of LCOS 9.10. On a WLAN Controller this feature is supported as of LCOS 10.40. The parameters can only be rolled out to the access points if these also use a firmware as of LCOS 10.40. |
...
- LCOS as of version 10.40 on the access point and the WLAN Controller (download latest version)
- LANtools as of version 10.40 (download latest version)
- Configured and functional WLAN
Procedure:
Stand-alone access point:
1) Open the configuration of the access point in LANconfig, go to the menu Wireless LAN → General → Logical WLAN settings and select the WLAN interface whose bandwith is to be limited for individual WiFi devices (in this example WLAN interface 1 -Network 2).
...