...
- Type: Select the option VLAN.
- VLAN: From the drop-down menu, select the VLAN to be used for routing.
- Routing Mode: The routing for the interface can be activated or deactivated here. Choose the option Enable.
- Admin Mode: The routing for the VLAN can be globally activated or deactivated here. Choose the option Enable.
- IP Address Configuration Method: Choose the option Manual so that a fixed IP address can be assigned. This is necessary for the routing to work.
- IP address: Enter an IPv6 IP address that the switch should use on the VLAN. The switch will be addressed under this IP address.
- Subnet mask: Enter the subnet mask for the related network.
...