This document describes how to set up a DNS loopback address to send DNS requests from a specific source address.
This is useful for environments where DNS requests are sent over a VPN connection. With this type of configuration, a DNS request may be sent from an interface without being checked by a VPN rule. The DNS request will not reach its destination.
2.2) Add a new entry.
3. Sonderfall) Exception: Der DNS-Server soll über eine mit einem Routing-Tag versehene Route erreicht werdenThe DNS server can be reached via a routing entry with an assigned routing tag:
If a Routing tag is assigned to a routing entry (in this example the tag 5), this tag must be entered in DNS forwarding and in DNS Loopback.
3.1) Erstellen Sie wie in Schritt 1. beschrieben eine DNS-Weiterleitung ein und geben bei Gegenstelle die IP-Adresse des DNS-Servers gefolgt von einem @ und dem Routing-Tag an (z.BCreate an entry for DNS forwarding as explained in step 1) and enter the IP address of the DNS server followed by an @ and the routing tag (e.g. 192.168.1.1@5, wenn das Routing-Tag if the routing tag 5 verwendet wirdis used).
3.2 Erstellen Sie wie in Schritt 2. beschrieben eine Loopback-Adresse und geben bei Ziel die IP-Adresse des DNS-Servers gefolgt von einem @ und dem Routing-Tag an (z.B) Create an entry for a Loopback address as explained in step 2) and enter the IP address of the DNS server followed by an @ and the routing tag (e.g. 192.168.1.1@5, wenn das Routing-Tag if the routing tag 5 verwendet wirdis used).