...
- Enable: Set the checkmark under Enable if the traffic for a specific Frame Type should be limited.
- Rate (pps): Enter a sensible value for the number of packets per second second (pps = packets per second) the throughput should be limited to.
Info |
---|
Der Buchstabe The letter K bei under rate (pps) steht für die Zahl represents the number 1000. 4K bedeutet also beispielsweise Therefore 4K represents the number 4000. |
3. Wechseln Sie in das Menü ) Go to the menu Maintenance → Save/Restore → Save Start und klicken auf Save, um die Konfiguration als Start-Konfiguration zu speichern.
Hinweis |
---|
Nach einem Neustart des Switches wird immer die Start-Konfiguration geladen. Liegt diese nicht vor, wird die Standard-Konfiguration geladen und der Switch befindet sich wieder im Werkszustand. |
and click Save to save the configuration as Start Configuration.
Hinweis |
---|
After restarting the switch, the start configuration is always loaded. If none is available, the default configuration will be loaded and the switch starts in its factory state. |
4) The configuration of the device is now complete4. Die Konfiguration des Gerätes ist damit abgeschlossen.