...
Hinweis |
---|
|
Requirements:
- LCOS as of version 9.10 (download latest version)
- LANtools as of version 9.10 (download latest version)
- At least two LANCOM WLAN controllers
- LANCOM High Availability Clustering Option (for configuration synchronization)
- The second WLAN controller (slave) must initially be unconfigured and still with its factory settings.
- Under no circumstances is the option Certificate authority (CA) active in the menu Certificates → Cert. authority (CA) to be enabled on the second WLAN controller (slave)!
...
1.1) Configuring the first WLAN controller (master):
1.1.1) Perform the basic setup on the first WLAN controller (master).
1.1.2) Assign the first WLAN controller (master) a descriptive device name in the menu Management → Admin (in this example WLC-Master).
...
2.9) This completes the setup of the WLC cluster.
Info |
---|
If the Config Sync isn't active after going through the setup wizard, the CLI command do /Status/Config/Sync/New-Cluster/Launch has to be executed on the Master to start the Config Sync manually. |
3) Further steps in case of problems with Config Sync (HA cluster):
If the configuration synchronization (Config Sync) between the cluster members does not work, you can follow the steps in the Troubleshooting guide: Configuration synchronization doesn't work anymore (Config Sync).