...
- Stack Manager Source Image:
Select the source firmware slot in the Stack Manager.- Active: The firmware in the Active slot of the Stack Manager can only be is always transfered to the the Backup slot of the Stack members. This is the recommended procedure.
- Backup: The firmware in the Backup slot of the Stack Manager can only be is always transfered to the Active Backup slot of the Stack members.
- Destination Switch ID:
Select the switch in the Stacking group whose firmware should be updated. - Destination Image:
The destination firmware slot on the Stack member results from the selection of the Stack Manager Source Image on the Stack Manager.- Active: The Active slot of the Stack member is addressed by selecting the Backup slot on the Stack Manager.
- Backup: The Backup slot of the Stack member is addressed by selecting the Active slot on the Stack Manager. This is the recommended procedure.
| Info |
|---|
After transfering the firmware to the |
| Info |
If the firmware is transfered to the Backup slot of the Stack members, these have to be rebooted afterwards in order for the firmware to be activated. |
