Seitenhistorie

...

Info

If the access point should be configured manually or via the LANCOM Management Cloud, the switch Operating with WLC has to be set to No.

It is planned for a future firmware version to deactivate the WLAN management after a certain period of time if a WLAN controller hasn't been found.

Info
Informations on the supported WLC features are available in this knowledge base document.

Image Modified

WLAN management with WLC: No unencrypted Control channel

...

Info

The entry Default is set to DTLS ex factory. This setting can be verified or changed via WEBconfig or the CLI.

WEBconfig:
Extras → LCOS Menu Tree→ Setup → WLAN-Management → AP-Configuration → Control-Connection-Encryption-default

CLI:
Setup/WLAN-Management/AP-Configuration/Control-Connection-Encryption-default

Image Modified

LEPS-MAC: Format of the MAC address

...

Info
The same format has to be used when configuring this feature via the CLI.

Image Modified

Seitenhierarchie