...
| Hinweis |
|---|
Where an upstream router is operated, port forwarding to be set up on it to enable access to the Unified Firewall. This is described in step 3 for LANCOM routers. If access by LANCOM Support is no longer required, LANCOM Systems recommends that you deactivate the remote access. |
| Info |
|---|
Necessary IP addresses for remote access: SSH:
Webclient:
|
Requirements:
- LANCOM R&S®Unified Firewall with firmware version 10.2 or later
- Web browser for configuring the Unified Firewall.
The following browsers are supported:- Google Chrome
- Chromium
- Mozilla Firefox
...
| Info |
|---|
Before LCOS FX 10.4 the IP address 217.6.21.90 must also be entered in CIDR notation. |
Necessary entries:
- 212.117.89.9 /32
- 217.6.21.90/32 (only before LCOS FX 10.4)
...
| Info |
|---|
Before LCOS FX 10.4 the IP address 62.153.130.132 must also be entered in CIDR notation. |
Necessary entries:
- 212.117.89.9 /32
- 217.6.21.90/32
- 62.153.130.132/32 (only before LCOS FX 10.4)
...
If a LANCOM router is operated upstream, it needs to be set up with port forwarding to enable access to the Unified Firewall. This is the case when using the layer-3 loop and a “series” connection .
3.1) Open the configuration for the router in LANconfig and switch to the menu item IP-Router → Masq . → Port forwarding table .
...