...
The Setup Wizard is only available after a fresh installation and is launched automatically after changes to the login data.
...
| Info |
|---|
The Unified Firewall can be reset to factory settings via System → Factory Settings. Afterwards the Setup Wizard can be started anew. |
1) Select Start setup in English.
...
- Firewall Hostname: If required, change the Firewall Hostname.
Important:
The Firewall Hostname may only contain lower case letters and must not contain numbers since otherwise user authentication via LDAP won't work!
- Time Zone: If required, change the Time Zone.
- Send Usage Statistics: Usage statistics help LANCOM Systems to identify frequently used scenarios and implement new features for them. We recommend that you enable this option.
- Send Crash Reports: Crash reports help LANCOM Systems with fault analysis. We recommend that you enable this option.
| Hinweis |
|---|
The Firewall Hostname may only contain lower case letters and must not contain numbers since otherwise user authentication via LDAP won't work! |
4.1) Configuring Internet access with DHCP dynamic IP address assignment (e.g. via a cable modem):
...
6) Select the desired UTM features and click Next.
...
| Info |
|---|
By default, all UTM features are enabled. |
...
| Hinweis |
|---|
Operating the UTM features after the trial period expires requires Full License. |
7) You can now review your configuration in a Summary. Then click on Finish to complete the setup and write the configuration to the Unified Firewall.
...
The procedure for importing the HTTPS proxy certificate into a mobile device is described in this Knowledge Base article as of step 3.4.
Manual download of the Mail Proxy CA (Optional):
When using an E-Mail program like MS Outtlook which connects to an E-Mail server in the internet, the Mail Proxy CA has to be exported in the Unified Firewall and imported into the end device which is accessing E-Mails via the E-Mail program.
...
| Info |
|---|
If an E-Mail server is used in the local network or E-Mails are accessed via the website of an E-Mail provider, the Mail Proxy CA doesn't have to be imported. |
Open the the web interface of the Unified Firewall and go to the menu Certificate Management → Certificates, klick on the Export button at Mail Proxy CA and export the certificate in PEM format. The procedure for the certificate import into an end device is described in this Knowledge Base document (as of step 3.4).
