Versionen im Vergleich

Alte Version 8

changes.mady.by.user LANCOM Redaktion

Gespeichert am

verglichen mit

Neue Version 9

changes.mady.by.user LANCOM Redaktion

Gespeichert am

Schlüssel

  • Diese Zeile wurde hinzugefügt.
  • Diese Zeile wurde entfernt.
  • Formatierung wurde geändert.

...

Hinweis

Where an upstream router is operated, port forwarding to be set up on it to enable access to the Unified Firewall. This is described in step 3 for LANCOM routers.

If access by LANCOM Support is no longer required, LANCOM Systems recommends that you deactivate the remote access.

Info

Necessary IP addresses for remote access:

SSH:

  • 212.117.89.9/32
  • 217.6.21.90/32 (existing entry LANCOM Customer Support, before LCOS FX 10.4 the entry has to be created manually)
  • 80.246.32.0/24 (existing entry Rohde & Schwarz Internet Gateway) 
  • 213.238.47.128/29 (existing entry Rohde & Schwarz Cynersecurity Customer Support)

Webclient:

  • 212.117.89.9/32
  • 217.6.21.90/32
  • 62.153.130.132/32 (existing entry LANCOM Customer Support, before LCOS FX 10.4 the entry has to be created manually)
  • 80.246.32.0/24 (existing entry Rohde & Schwarz Internet Gateway) 
  • 213.238.47.128/29 (existing entry Rohde & Schwarz Cynersecurity Customer Support)



Requirements:

  • LANCOM R&S®Unified Firewall with firmware version 10.2 or later
  • Web browser for configuring the Unified Firewall.

    The following browsers are supported:
    • Google Chrome
    • Chromium
    • Mozilla Firefox

...

Info

Before LCOS FX 10.4 the IP address 217.6.21.90 must also be entered in CIDR notation.

Necessary entries:

  • 212.117.89.9/32
  • 217.6.21.90/32 (only before LCOS FX 10.4)

...

Info

Before LCOS FX 10.4 the IP address 62.153.130.132 must also be entered in CIDR notation.

Necessary entries:

  • 212.117.89.9/32
  • 217.6.21.90/32
  • 62.153.130.132/32 (only before LCOS FX 10.4)

...