Image Added
5.12) Now close the configuration dialogs with the OK button. This concludes the configuration of the PC.
Function check:
6.1) Make sure that the PC is connected to the switch port that you have configured with access control as per IEEE 802.1X.
6.2) Restart your PC and logon to the system as usual.
6.3) While the PC attempts to connect to the network, you see a note in system tray that additional credentials are required to establish of the network connection.
6.4) Click on this note to open a window where you can authenticate for the network by entering a user name and password.
6.5) At this stage you enter the user data that you entered into the LANCOM RADIUS server user table in configuration step 2.5. In this example is user name is PC1 and the password is lancom.
6.6) After you click OK, the PC authenticates and the switch port that the PC is connected to is activated for data transfer.