Seitenhistorie

In its default setting, a LANCOM access point operated with LCOS LX automatically obtains its local IPv4 parameters (IP address, default gateway, DNS server) from a DHCP server present in the local network.

This document describes how you can perform a static IPv4 network configuration in LCOS LX.

Requirements:

• LCOS LX as of version 4.0 (download)

• LANtools version 10.30 or later (download)

• Access Point with LCOS LX

1) Procedure with LANconfig:

1.1) In LANconfig, open the configuration dialog for the LW-500 LCOS LX operated Access Point and switch to the menu item IP configuration -> LAN interfaces.
Image Removed
Image Added

1.2) In this example, we create a static IPv4 configuration for the default LAN interface INTRANET.

• Set the IPv4 address source to the value static.

• Use the field Static IPv4 address to assign an IP address in the CIDR notation (e.g., 192.168.66.124/24 for a class-C network).

Image Removed
Image Added

1.3) Open the menu IP configuration -> Static parameters.
Image Removed
Image Added

1.4) For the default interface INTRANET, assign the other IP parameters such as the default gateway and a primary and/or secondary DNS server.
Image Removed
Image Added

1.5) Write the configuration back to the access point.



2) Procedure with WEBconfig:

2.1) Open the configuration of the LW-500 in WEBconfig and login with the username root and the main device password.

Image Added

2.2) Switch to the menu System configuration and click on the link Adjust the network settings of this device.
Image Removed
Image Added

2.3) Set the IPv4 settings to static.

• Use the field IPv4 address to assign an IP address in the CIDR notation (e.g., 192.168.66.124/24 for a class-C network).

• Assign the other IP parameters such as the IPv4 gateway and a primary and/or secondary DNS server.

Image Removed
Image Added

2.4) Click on Confirm to write the configuration back to the access point.