...
- For the VLAN where multicast should be used, activate the option Snooping Enabled.
- Be sure that the option Querier Election is activated for each VLAN where multicast should be used.
| Info |
|---|
In order for IAPP messages (Inter Access Point Protocol) to be transmitted with active IGMP Snooping, the parameter Compatibility has to be set to the option Forced IGMPv3 for the respective VLAN. However it is not practical to always use this setting as otherwise IGMPv1 and IGMPv2 messages would not be transmitted. Therefore the option Forced IGMPv3 should only be selected for a VLAN, where access points have to exchange IAPP messages.
|
6) When you are finished, click the disk icon in the top right corner to save the configuration as the start configuration.
...