...
| Info |
|---|
Access points that are operated in a WLC WLAN-Controller scenario must each be configured individually. A central configuration of the steps described here via a WLC WLAN-Controller is not possible. This scenario can also be implemented with LCOS access points. |
...
- Name / MAC address: Enter a user name that the access point uses to authenticate itself at the RADIUS server.
- Password: Enter a password that the access point uses to authenticate itself at the RADIUS server.
- Service type: From the drop-down menu, select Call -Checkcheck.
- Expiry type: From the drop-down menu, select Never so that the user account remains permanently valid.
| Info |
|---|
As of SWOS 3.32 RU7 the switch sends RADIUS requests with the Service type Call-Check. In this case the Service type in this menu als has to be set to Call-Check. As an alternative the option Any can also be selected. The Service type Call -Checkcheck is supported as of LCOS 10.30. |
1.8) This concludes the configuration of the RADIUS server on the LANCOM router. You can now write the configuration back to the device.
...
- Method: From the drop-down menu, select MD5. MD5 is used as the standard method in LANCOM routers.
- Username: Enter the Name / MAC address set in step 1.7. The access point uses this to authenticate itself at the RADIUS server.
- Password: Enter the password set in step 1.7. The access point uses this to authenticate itself at the RADIUS server.
...
3.1.4) The configuration of the access point via LANconfig is now complete. You can now write the configuration back to the device.
...
- Username: Enter the Name / MAC address set in step 1.7. The access point uses this to authenticate itself at the RADIUS server.
- Password: Enter the password set in step 1.7. The access point uses this to authenticate itself at the RADIUS server.
- Method: From the drop-down menu, select MD5. MD5 is used as the standard method in LANCOM routers.
...
3.2.3) The configuration of the access point is now complete.