...
| Seiteneigenschaften |
|---|
Description:
Due to higher bandwith or redundancy needs some scenarios require several switch ports to be combined. This can be implemented with the protocol LACP (Link Aggregation Control Protocol).
This article describes how to configure an LACP Trunk on an GS-3xxx series switch.
| Info |
|---|
In contrast to a Static Trunk the feature LACP supports a dynamic negotiation, thus enabling the Trunk to remain active when a line fails. |
...
- LACP Enabled: Set the checkmark at LACP Enabled for all ports to be combined via LACP (in this example the ports 3 and 4).
- Key: Enter the same Key for all ports within an LACP Trunk (in this example the digit 1), so that the assignment is unambiguous.
...
3) With the configuration complete, click on the "floppy disk" symbol to save the configuration as the boot configuration.
| Info |
|---|
The start configuration is retained even if the device is restarted or there is a power failure. |
...