...
Seiteneigenschaften |
---|
Description:
In diesem Artikel wird beschrieben, wie ein eigenes Zertifikat für das Webinterface auf einem Switch der GS-23xx Serie verwendet werden kannThis article describes how an own certificate for the webinterface can be used on a GS-23xx series switch.
Requirements:
- Switch der GS-23xx Serie
- Beliebiger Web-Browser für den Zugriff auf das Webinterface
- Eigenes SSL-Zertifikat. Dieses muss folgende Voraussetzungen erfüllen:
- Das Zertifikat muss im *.pem Format vorliegen
- Das Zertifikat muss die gesamte Zertifikats-Kette inkl. Private Key enthalten
- Das Zertifikat muss eine Länge von mindestens 2048 Bit haben
Procedure:
1. Öffnen Sie die Konfiguration des GS-23xx Switches in einem Web-Browser, wechseln in das Menü Security → HTTPS → Configuration und stellen sicher, dass bei HTTPS Mode die Option Enabled ausgewählt ist.
- series switch
- Any web browser for accessing the webinterface
- Own SSL certificate. The following requirements must be fullfilled:
- The certificate must be available in *.pem format
- The certificate must contain the whole certificate chain including the Private Key
- The certificate ,ust have a length of at least 2048 Bit
Procedure:
1) Open the configuration of the GS-23xx in a web browser, go to the menu Security → HTTPS → Configuration and make sure, that the parameter HTTPS Mode is set to Enabled.
2) Go to the menu Security → HTTPS → Certificate Upload and select the certificate file. Click Upload afterwards to upload the certificate to the switch2. Wechseln Sie in das Menü Security → HTTPS → Certificate Upload und wählen die Zertifikats-Datei aus. Klicken Sie anschließend auf Upload, um das Zertifikat in den Switch hochzuladen.