.Image Added
Info |
---|
If more than one LACP trunk is used on the switch the option Specific has to be selected and a unique value has to be entered for each trunk under Key. In this example the ports 1 and 2 as well as 3 and 4 each form an LACP trunk, as the same value is assigned to the members of each group. Image Added |
1.3) Save your new settings with the Apply button.
Tip:
In order for the settings to be saved as boot persistent, use the configuration bar to navigate to the section Maintenance -> Save/Restore -> Save Start and click the Save button in the configuration area.
2) Configuration steps for a LANCOM access point:
2.1) Open the device configuration with LANconfig.
2.2) Navigate to the section Interfaces